Frequently Asked Questions​
EnergySaver is available for iOS and Android devices. It can be purchased at the App Store and Google Play.
You must select a profile in order to activate the other buttons on the home screen.
To add appliances, select the profile you wish to add them to and click the edit button.
Once you have added your appliances to the profile, click on the settings button. To set each rate, click on the icon (electricity, gas, or water). Either choose/customize from the preset rate list or enter your specific rates. You must select each icon to set the rates for each utility.
Yes. First, select the state whose rates you want. Then, you can change the specific rate by clicking on the rate button. You can also change between tiered and fixed rate information by clicking on the on/off button.
Natural gas is often billed in units of cubic feet. The most common unit for billing is 100 cu.ft.(1 ccf = 100 cu.ft.) For conversion purposes, 1 ccf = 1 Therm. Occasionally, natural gas is billed in units of 1,000 cu.ft. (1 mcf = 1,000 cu.ft.) To convert for Therms, 1 mcf = 10 Therms.
Water is often billed in units of cubic feet. The most common billing unit is 100 cu.ft. (1 ccf = 100 cu.ft.) For converting from cubic feet of water to gallons of water, 100 cu.ft. = 748 gallons or 1 cu.ft. = 7.48 gallons.
First, select the appliance you want. Then, click on the individual buttons to change the consumption rate, hours in use, etc. to customize to your exact specifications.
For more detailed information, click on the pie chart segment or column whose information you want.
Phantom load is also known as standby power. It is the electric power consumed by electronic devices and appliances while they are switched off or in standby mode. Basically, it is electricity that is consumed when the device or appliance is not actually being used. Phantom load is most commonly seen in devices or appliances with remote controls or digital clocks. It can also be found in computers, computer monitors and gaming consoles.
Yes. Click on the magnifying glass icon in the upper right corner. The charts will then expand to the full page. To switch back, click on the icon again.
EnergySaver automatically checks for updates when it starts. You can also go to the support page (click on the top right corner of the home screen) to check for updates.
Did not find answer to your question?